Glow plug, super-duty (long-medium)/gasket

Stub axle pins (4)

U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)

Carburetor body/ fuel inlet plug/ 5x.9mm O-ring (1-each) (TRX 2.5, 2.5R)

Motor/ pinion gear/ motor bushing (EZ-Start 2)

Spur gear, 38-tooth (1.0 metric pitch)

Exhaust tip, rubber (7mm i.d. for N. Stampede) (1

Differential output yokes (2)/ 3x5mm countersunk screws (2)/ 3mm set (set) screws (4)

Yokes, differential and transmission (2)/ 4x15mm screw pins (2)

Caster blocks, (30-degree) (l&r)

Carburetor, complete (minus air filter assy.) (TRX 2.5, 2.5R composite slide)

Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal u-joints (4)

Suspension screw pin set (T-Maxx, E-Maxx)

Suspension screw pin set, hardened steel (hex drive)

Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10)

Push rod (steel) (assembled with rod ends) (2) (use with long travel or #5357 progressive-1 rockers)

Skid plates (f&r)/ fiberglass transmission spacer plate

Tires & wheels, assembled, glued (SS (Split Spoke) chrome wheels, Talon tires, foam inserts) (2) (fits Maxx/Revo series)

Clutch shoes (2)/ spring (T-Maxx/Revo/Jato/Nitro 4-Tec

Output gears, forward & reverse/ drive dog carrier

Spur gear, 54-tooth (0.8 metric pitch)

Skidplate, front plastic (grey)/ stainless steel plate

chassis braces lower (2

servo saver (large

stub axle steel 2

o ring fuel tank cap revo

cush drive elements 4

spur gear 32 pitch ספול-גיר לסטמפיד

gear set, 2 speed standard ratio 2nd speed gear 39t 13t-17t input gears hardware

spur gear 32 pitch

Primary gears, forward and reverse/ 2x11.8mm pin/ pin retainer/ disc spring

Carriers, stub axle (rear) (2)

Steering bellcranks (2)/ bellcrank bushings (5x8x2.5mm) (4)/ bellcrank post spacers (2)/ draglink/ 3x8mm shoulder screws (2)

Engine mount, aluminum/ 3x10 CS with washers (8)

Gear set (complete) (EZ-Start 2)

Screws, 4x10mm button-head machine (hex drive) (6)

Linkage set, throttle & brake, Revo-Slayer (includes servo horns, rod guides, brake spring, brake adjustment dial, brake lever, rods (wires), bellcrank, throttle return spring, hardware)

Header, exhaust (tubular aluminum, silver-anodized) (TRX 2.5, 2.5R)

Toe links, Revo (Tubes red-anodized, 7075-T6 aluminum, stronger than titanium) (128mm, fits front or rear) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)

Tuned pipe, Resonator, R.O.A.R. legal (aluminum, double-chamber) (fits Maxx vehicles with TRX Racing Engines)

Suspension arms upper (1)/ suspension arm lower (1) (right front)

Bulkheads (L&R) (front) (grey)

Ultra shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)

Wheelie bar mount (1)/ hardware (Stampede, Rustler, Bandit series). Use Part #4974 and 4976 to complete the wheelie bar assembly. מתאם לווילי בר

Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1)

Wheelie bar, assembled (fits all Maxx trucks)